tepro DETROIT Bedienungsanleitung Seite 21

4. Attach side handle and insert char-
coal pan
Use M6x25 screws (F) and spacer (G)
to attach side handle (9) to grill body
(8). Insert charcoal pan (7) in grill body.
5. Mount windshields
Use M6x12 screws (A) and M6 nuts (B)
to mount the left (1), right (2) and center
(3) windshields to grill body. Then attach
rear windshield (4) to grill body using the
M6x12 screws (A) and M6 nuts (B).
se M6x12 screws (A) and M6 nuts (B)
to mount the rear windshield (4) to the
left (1) and the right (2) windshield.
6. Insert grates
Attach grate holders (6) to grates.
Slide grate (5) onto the guide rails on
the windshield at the desired height.
I
mportant: All screws must
be fastened tight.
GB
21