Motorola RMN5052 Betriebsanleitung Seite 8

Disconnecting the Microphone from
Radio
1. Turn the locking collar on the radio
end of the microphone 1/4 turn
counterclockwise.
2. Pull cable from accessory interface
connector to release.
COILED CORD REPLACEMENT
To remove the RMN5053 coiled cord:
1. Rotate the locking collar at the base of
the microphone in a counterclockwise
direction until it stops.
2. Pull the cord out and away from the
base of the microphone.
Install a coiled cord in the reverse order
of removal.
6