RAVPower RP-WD009 Bedienungsanleitung Seite 23

2. Firmware Upgrade
You may choose to upgrade the rmware when there is any update
available.
3. Reset Settings
Tap the ON / OFF button to ON, and resetting will start. The
WiFi indicator on the Filehub will ash blue for a few seconds
and turn to steady on after the device is rebooted. Then the
resetting is done.
Note:
1) Resetting the Filehub means to recover it to the factory
settings, all data con gured previously will be reset, including
the name set for the Filehub and its connection with your
mobile.
2) You may also insert a needle into the Reset pin hole on the
Filehub, hold it for 3s to reset.
4. Wizard
Follow the instruction step by step for a quick setting for use (AP
mode for example).
40 / 41