RAVPower RP-WD009 Bedienungsanleitung Seite 17

b) When the device is connected to a wire network, Wired
Access will be selected automatically. Change the IP
Addresss and other parameters and tap Save.
Note: Please consult the network administrator or refer to the
wired network user documentation for selecting Static IP,
dynamic IP or PPPoE as provided for this Filehub. If using a DSL
Internet, please enter the PPPoE username and password and
click Save.
a) Static IP: You need to go
to the TCP / IP settings
and specify the IP address
and ADNS settings.
28 / 29