FIMAR SE/1550 Benutz Und Wartungsanleitung Seite 30

Some faults may be resolved by the user, others require specific technical skills or abil-
ities and must only be performed by qualified personnel with recognised experience in
the specific sector.
Important
Do not remove internal appliance parts.
The manufacturer is not liable for any machine tampering!
Table 2: Operating malfunctions
Problem
The bandsaw overheats
The equipment does not start.
GB
Cutting is irregular
Causes
The blade guide device is
jammed with process residue.
Bearings damaged.
Main switch off.
Bandsaw incorrectly tensioned. Adjust bandsaw tension.
Cutting blade dull.
- 14 -
BONE BANDSAW SE
(EXTRA CE VERSION)
Solutions
Clean the blade guide device.
Contact your dealer or
authorised service centre.
Turn on main switch.
Sharpen the bandsaw or
replace it with a new one.
English language