Camry CR 1167 Bedienungsanweisung Seite 5

device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact
professional electrician in this matter.
15. Avoid getting the radio wet.
16. The radio may only be wiped with a dry cloth. Do not use water or cleaning fluids.
17. Special discs for cleaning the CD player should be used regularly.
18. The radio should be kept in a dry room.
DESCRIPTION OF THE DEVICE
2. FM frequency scale (VHF) 3. Volume control knob
4. CD player cover support 5. CD player cover 6. CD plate 7. CD/MP3 player function keys
8. Speakers 9. USB port 10. Headphone jack 11. Function keys: FM (radio, VHF band), CD/USB (CD and MP3 player),
Bluetooth 12. FM.ST indicator (radio reception in stereo) 13. Remote control sensor
14. Frequency control knob 15. The LED indicator for playing pre-programmed playlist 16. Track number display
17. REPEAT/ALL – repeat mode button for song/all songs 18. PROGRAM – button to program the playlist
19. B.SKIP – the BACK button 20. F.SKIP – the FORWARD button 21. PLAY/PAUSE – the PLAY/PAUSE button
22. STOP – the STOP button 23. Security lock lifting lever 24. Power cable 25. FM antenna
26. ON/OFF switch 27. 10 tracks FORWARD button 28. 10 tracks BACK button 29. REPEAT, see no. 17
30. PROGRAM, see no. 18. 31. PLAY/PAUSE, see no. 21 32. STOP, see no. 22 33. UP/FF – the FORWARD button
34. DN/FB – the BACK button
Using Bluetooth
Press the Bluetooth function button. The bluetooth button will start flashing. Connect to the device.
USING THE REMOTE
When pressing the control function keys, the remote should be pointed towards the remote control sensor (13). Description of the remote
control function keys is provided in the device description.
LISTENING TO THE RADIO
Before first use, unpack everything and remove all protective materials. Unwind the FM antenna cable and power cable. Do not cover the
ventilation holes, make sure that there is a space of a few centimeters around the radio, which is required for proper ventilation. To turn the
radio on, press the ON switch on the left side of the radio case (26). Press the band or FM (VHF) band button to set the frequency range
(the function keys (11). While turning the frequency control knob (14), find the desired station. You can set the volume by turning the volume
control knob (3). If the reception signal is too weak, try to move the antenna. You can also move the radio to a different location or turn it in
the other direction to catch the strongest signal.
PLAYBACK OF AUDIO CDs OR MP3 CDs
Important: The CD player can play audio CDs, CD-R and CD-RW discs. It may not be possible to read some discs due to mechanical
failure, the quality of the media or the software used to burn the disc. There is no 100% guarantee that all CDs or MP3 disc will be read.
The device may not be compatible with all the files because of the differences in the coding.
1.Turn on the device by pressing the button (26). Press the CD/USB function key (11). The CD play mode will start.
2.Lift the cover (5) until it locks on the CD player cover support (4).
3.Using the lever (23), lift the CD safety lock. Put the CD on the spindle with the label up. Push the lock down. To close the cover (5),
gently pull the player cover support towards you (4) and gently lover the cover (5).
4.The track number display (16) will flash for a few seconds and then it will display the number of tracks on the disc or folder (for Mp3
discs).
5.The player will automatically start with the first track. The disc will play until the end of the last track.
REPEAT DISC/TRACK OPTION
Set the number of the track pressing the DN/F.B (34) and the UP/F.F buttons (33). Press once the REPEAT/ALL button (17).
To play all tracks from MP3 disc or folder – press the REPEAT/ALL button (17) twice.
PROGRAMMING PLAYBACK SEQUENCE
1.Press the PROGRAM button (18). Select the track that you want to add to the playlist pressing the DN/F.B (34) and UP/F.F (33)
buttons. Press the PROGRAM button again.
The track is added to the memory. Select the next track.
The memory function can program 20 audio tracks and 99 MP3 tracks in sequence.
2.To play the programmed playlist, press the Play/Pause button.
You can use the play repeat mode (read: disc/track repeat option).
To exit the programmed playlist play mode, press the LW or FM function keys (11) or lift the disc safety lock lever (23).
PLAYBACK OF MP3 FILES FROM USB MEMORY
1.Turn on the device by pressing the button (26). Press the CD/USB function button (11). The CD and MP3 play mode will start. Verify
that no CD is in the reader slot.
5