Honda EG3600CL Bedienungsanleitung Seite 56

11/04/26 16:16:36 32Z30600_056
Four Wheel Kit Installation
1. Install the lock plate and four wheels on the wheel shaft using the
plain washers and split pins.
Install the front wheel shaft on the front side nearest the engine.
2. Install the wheel shaft assembly on the generator using eight 8
mm flange bolts.
TORQUE: 24 29 N·m (2.4 3.0 kgf·m , 17 22 lbf·ft)
8 16 mm FLANGE BOLT (8) ×
8 mm
FLANGE NUT (8)
FRONT WHEEL SHAFT
54
− −
LOCK PLATE
−
LONGER
REAR WHEEL SHAFT
WHEEL (4)
20 mm PLAIN WASHER (5)
4 28 mm SPLIT PIN (4) ×
× 16
GENERATOR
SIDE