Optional Accessories; Associated Products - Sony BDX-E1000 Bedienungsanleitung

Compact 19-inch rack mountable design with
the height of 3U
Thanks to an advanced 0.35µm semiconductor
process, the MPEG encoder chip, containing a newly
developed RISC processor, features the compact
design and low power consumption.

Optional Accessories

BDKP-E1002 Audio Input Board
When installed in this encoder unit, the BDKP-E1002
expands the 4-channel digital audio of this encoder
unit to 8-channel digital audio.
BDKP-E1003 4:2:2P Upgrade Board
With the BDKP-E1003 installed, this unit can be used
as an encoder for both MP@ML and 4:2:2P@ML.
BDKP-E1004 Scrambler Board
When installed in this encoder unit, the BDKP-E1004
enables scramble processing of DVB common format.
BDKP-E1005 Scrambler Board
When installed in this encoder unit, the BDKP-E1005
enables scramble processing of DES format.
RMM-30 Rack Mount Rail
Consists of slide rails to mount this encoder unit into
a 19-inch standard rack.
EX-504 Extension Board
To check and adjust the internal card boards (VPR-33,
ENC-40, APR-25 and SY-240) while pulling them out
of the unit.
Maintenance Manual
Contains information on service for parts (adjustments,
mounting views, block diagrams, parts lists) and for
block and board replacements.
Power Cords
.............................................................................................................................................................................................................................
1) Windows95, Window98 and Windows NT are
trademarks of Microsoft Corporation.
3/01-12_BDXE1000.05GB 3

Associated Products

BDX-M1000 MPEG Multiplexer Unit
Unit to multiplex the transport bit streams of up to 18
channels.
BDX-D1000 MPEG Decoder Unit
Unit to select and decode a program multiplexed in the
MPEG transport streams and output digital and analog
video/audio signals.
BDX-N1000 Network Interface Unit
Interface unit to send and receive MPEG transport
stream data via ATM network.
BZX-E1001 Encoding Setup Software
Software to make settings of the BDX-E1000 through
RS-232C. It operates on Windows95, 98 and NT
01.9.4, 4:13 PM
BDX-E1000
1)
3 (E)
3-856-836-05(1)