Abus IP Installer Bedienungsanleitung Seite 52

5.4. TCP/IP
HTTP Port Select port 80 in general situations. If you want to use a port number other than 80, select the
text box and enter a port number between 1024 and 65535.
When you have set the HTTP port number to a number other than 80 on the Network
Example: when HTTP port number is set to 2000
MAC Address Display the MAC address of the camera.
IP Address
Obtain IP automatically (DHCP) If a DHCP server is installed on the network, to select this while the IP
address is assigned by the DHCP server.
When you set Obtain IP automatically (DHCP), make sure that the DHCP server is working
on the network.
Use the following IP Select this when a fixed IP address is set.
IP Address Enter the IP address of the camera.
Subnet mask Enter the subnet mask.
Default Gateway Enter the default gateway.
Obtain DNS server automatically If a DHCP server is installed on the network, to select this while the
DNS server is assigned by the DHCP server.
setting page or in the Setup Program, access the camera by typing the IP address
of the camera on the web browser as follows:
http://192.168.0.100:2000/
52
English