Avantree BTHS-063 Bedienungsanleitung Seite 5

Pair & Connect
Set headphones into Pairing Mode–
From o state, hold
alternately. (Note: For rst time use, the headphones will enter paring mode auto-
matically once powered on.)
Pair with mobile device-
• Set the headphones into pairing mode as above.
• On your mobile device, turn on the BLUETOOTH function and search for new
devices.
• Select "Avantree HS063" to connect. Once connected, the LED on the
headphone will ash twice every 5 seconds.
Note: If you are using a Bluetooth transmitter please follow its user manual to set
the transmitter into PAIRING MODE
To add another mobile device
• Connect the FIRST mobile device as above. Once they've connected, turn the
headphone o .
• Connect the headphones with the SECOND mobile device the same way you did
the rst one.
• Once you've connected the SECOND one, turn the FIRST one back on and select
"Avantree HS063" in its Bluetooth menu to reconnect manually. Now, the
Avantree HS063 is paired with TWO phones simultaneously.
Note: This ONLY works for two mobile devices, such as mobile phones and
tablets; this method will not work for PCs and Bluetooth transmitters.
Reconnection
Normally, when the next time you turn on Avantree HS063, it will automatically
reconnect to the most recently paired device. In case it doesn't auto reconnect,
try either pressing
ing manually by selecting "Avantree HS063" on your mobile device's Bluetooth
menu.
Using as a wired headphone
To use it as a wired headphone connect one end of the 3.5mm audio cable we
provided to the HS063 headphone, and plug the other end into the headphone
jack of the broadcasting device you're using.
for 5 seconds until the LED indicator ashes RED & BLUE
once to enter it into Reconnection Mode or try reconnect-
EN