Battery Backup - Kingston MobileLite Wireless Bedienungsanleitung

Battery Backup

In addition to being its own Wi-Fi network, MobileLite Wireless can also be used as a battery backup. This
feature allows you to charge a device, like a mobile phone or tablet, using the built-in USB port.
To use this function, follow these steps:
If the device is powered on, press and hold the power button for three seconds or until the
Power LED turns off.
Attach your mobile device to the USB port on the MobileLite Wireless (using its own Type-A
USB power cable).
AJ
With MobileLite Wireless powered off, press the power button once and release; do NOT
press and hold the power button, as this will turn the wireless broadcast function on.
Once the power LED begins to flash, the unit is ready and your mobile device should be
charging.
(not drawn to scale)
Document No. 480-13FUM-002.A00 Kingston MobileLite Wireless Page 14 of 14