Herunterladen Diese Seite drucken

Accessing The Internet (Bridge Mode) - Kingston MobileLite Wireless Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für MobileLite Wireless:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 35

Accessing the Internet (Bridge Mode)

Traditionally, the Wi-Fi antenna on your iPad or iPod touch device is used to access the Internet. The MobileLite
Wireless, however, uses the Wi-Fi antenna on your Apple device to stream content, which effectively disconnects
your iOS device from the Internet. Fortunately, MobileLite Wireless's Wi-Fi antenna supports bi-directional traffic
and can be used to implement a feature called Bridge Mode. This mode allows you to be connected to MobileLite
Wireless while it is connected to a Wi-Fi network (as a host client) that has access to the Internet.
To set up this feature and see a list of available wireless networks in your range, open the MobileLite Wireless
App and select 'Settings'. Under the ' Network Connection' section (Figure 12.1), tap on the Wi-Fi network that
you want to connect to. After making your selection, MobileLite Wireless will prompt you for the Wi-Fi password
(if security is enabled) and reboot. If there is no password, the device will automatically reboot.
Once MobileLite Wireless has rebooted, you will be prompted to select a wireless network. You MUST select
your MobileLite Wireless network in order to maintain access to its contents. Since you've already connected to
the network via MobileLite Wireless's App, there is no need to select it from the list again. If you do select it, you
will be disconnected from MobileLite Wireless.
To verify that you have successfully enabled Bridge Mode:
1. Select the MobileLite Wireless App icon on your iPad,
iPhone or iPod touch device.
2. Select the Device Name link, i.e. MobileLite Wireless (192.168.200.254).
3. Select the 'Settings' icon.
4. Select the Network Connections
button.
When the list of wireless networks appears, you will notice a
'tick' symbol located to the right of the network you selected in
the MobileLite Wireless App.
indicates that the bridge function is working properly and you
are connected to MobileLite Wireless and the Internet at the
same time.
So, if you're streaming content from the MobileLite Wireless
to your Apple device and need to look something up online
quickly, just open your Safari browser and away you go.
Document No. 480-13FUM-002.A00
See Figure 12.1.
Kingston MobileLite Wireless
This
Figure 13.1 – Bridged MobileLite Wireless
Page 13 of 14

Werbung

loading