Getting To Know Mobilelite Wireless - Kingston MobileLite Wireless Bedienungsanleitung

Getting to Know MobileLite Wireless

A
B H
E F G
D
C
A. USB 2.0 Port - Allows you to expand the storage capacity of MobileLite Wireless by connecting an external
USB storage device.
B. Micro-B USB Port - Allows you to charge MobileLite Wireless or connect it to a standard USB port for fast,
easy data transfer. Each media expansion port will require its own drive letter if media are inserted.
C. Power Button - Powers on or powers off the MobileLite Wireless device (you must press and hold for 3
seconds.)
D. Reset Button - Allows you to reset the MobileLite Wireless device back to its original (default) configuration.
E. Battery LED/Power* - Indicates the current battery status and current power state.
F. Wi-Fi LED - Indicates the current status for Wi-Fi broadcasting.
G. Bridged LED - Indicates whether or not MobileLite Wireless is bridged to an Internet gateway.
H. SD Slot - Allows you to expand the storage capacity of MobileLite Wireless by inserting a compatible SD card.
*
The battery LED also indicates how much battery time is left while the MobileLite Wireless is powered on. Green indicates 51% - 100%
battery charge remaining; orange indicates 25% - 50% battery charge remaining; and red indicates less than 25% battery charge remaining.
Document No. 480-13FUM-002.A00 Kingston MobileLite Wireless Page 5 of 14