Charging The Mobilelite Wireless; Battery Led; Battery Backup - Kingston MobileLite Wireless G3 Anleitungen

Charging the MobileLite Wireless

We urge you to fully charge the MLWG3 before you begin to use it. This can take up to three hours with
a 2A power adapter. The MLWG3 can also be charged with a computer's USB port, or a USB power
adapter (minimum 1.2A).

Battery LED

The battery indicator light on the front of the MLWG3 indicates the current battery strength and tells you
whether the MLWG3 is charging when it is connected to a computer or outlet. The battery indicator's
LED blinks when it is charging and has a solid green LED when it is finished.
The battery LED also indicates how much battery life is left while the MobileLite Wireless G3 is powered
on. Green indicates 51% - 100% battery charge remaining; orange indicates 25% - 50% battery charge
remaining; and red indicates less than 25% battery charge remaining.
51%-100% battery charge 25%-50% battery charge <25% battery charge

Battery Backup

In addition to being its own Wi-Fi network, MLWG3
can also be used as a battery backup.
This feature allows you to charge a mobile device
using the built-in USB port.
To use this function, with the MLWG3 powered off,
attach your mobile device to the USB port on the
MLWG3 using the mobile device's own USB power
cable.
With MobileLite Wireless G3 powered on, the
MLWG3 battery can still charge your device, but
the battery will be drained more quickly because it
is broadcasting a Wi-Fi signal while charging the
mobile device.
(not drawn to scale)
The LED will flash to indicate the mobile device
is charging.
Document No. Android-MLWG3-011816.A00 MobileLite Wireless G3 Page 7 of 29