Setup Wizard - Avermedia Capture Box C281 Bedienungsanleitung

 If your hard drive is not detected, keep the hard drive connected and restart the Capture Box. If problem remains
unsolved, refer to FAQ at www.avermedia.com for further troubleshooting.
 It is typical that, after a hard drive is formatted, the actual disk space of the drive would be slightly less than its unformatted
capacity.

3.3 Setup Wizard

When the first time you power on the Capture Box unit, the setup wizard appears. The following steps
guide you through the initial configuration process.
 Make sure to install internal hard drive or external USB storage device beforehand.
 For the first-time initialization, a short duration of black screen (approximately 20 seconds) is followed by
AVerMedia logo. The blinking green status light indicates that the Capture Box is starting up. Please wait
until the welcome screen appears.
Step 1
Setting up Language
When the welcome page appears, use ▲/▼ to
select your preferred language. Press OK to
confirm.
English-17