Avermedia Capture Box C281 Bedienungsanleitung Seite 21

Step 2
Measuring HDD Height Using Measuring Card
Use the measuring card placed on the HDD slot to measure the height of your HDD (9.5mm or
12.5mm / 7mm or 9.5mm).
 Please refer to the Appendix C for the measuring card.
Step 3
Adjusting the Rotary Knob
Adjust the rotary knob attached to the inner side of the lid to fit the height of your HDD.
The default position of the rotary knob fits HDD with 9.5mm height. If you use HDD with 7mm/
12.5mm height, rotate the rotary knob to the other direction.
 The device with measurement marked on the inner HDD lid may vary by region. Please read the instructions according
to the device purchased.
English-13