Inhaltsverzeichnis
Werbung
When connecting with the Capture Box, your console's audio output settings remain unchanged. If your
amplifier or other audio devices support optical digital audio output, you can still output digital audio. Please
follow the steps below to make digital audio cable connection and configure the audio output settings.
For Xbox 360:
Step 1
Connect one end of the digital audio cable (not included) to the DIGITAL AUDIO OUTPUT port on the
Universal Component Cable. Then connect the other end to the DIGITAL AUDIO INPUT (OPTICAL INPUT)
port on your amplifier or surround system.
Step 2
On your console, go to Settings > Console Settings > Audio > Digital Output and select the appropriate
digital audio setting for your amplifier or surround system.
For PS3:
Step 1
Connect your console with amplifier or surround system via digital audio cable (not included)
Step 2
On your console, go to Settings >Sound Settings > Set Audio Output Settings and select "Optical
Digital". Then select "Dolby Digital 5.1 Ch.".
Step 3
On your console, go to Settings > Sound Settings > Audio Multi-Output and set the option to "On".
Step 2
Connecting the Device to Your TV Using Component Video Cable
Connect one end of the component video cable to the COMPONENT VIDEO OUT port on the rear of
the device and the other end to the COMPONENT VIDEO IN (colored green, blue, and red) port on
your TV.
English-8
Werbung
Inhaltsverzeichnis
