Herunterladen Diese Seite drucken

Vitek VT-3407 W Die Betriebsanweisung Seite 6

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 7
ENGLISH
When the button (3) is pressed, the knife
rotates at maximal rotation speed.
During operation hold the motor unit (2) with
one hand and the chopper bowl (6) with the
other hand.
After using the unit, wait till the chopping knife
(7) fully stops.
Unplug the unit.
After using the chopper disconnect the motor
unit (2) from the geared lid (8).
Remove the geared lid (8).
Carefully remove the chopping knife (7) taking
it by the upper plastic end.
Take the chopped products out of the chop-
per bowl (6).
Attention!
Strictly follow the described sequence of
operations.
CLEANING
Attention! The blades of the chopping knife
(7) are very sharp and dangerous. Handle
the chopping knife (7) very carefully!
Unplug the unit before cleaning.
1.
Use a slightly damp cloth to clean the motor
2.
unit (2) and the reduction gears (8, 9), then
wipe them dry.
After processing of salty or sour products it is
3.
necessary to rinse the chopper knife (7) and
the blender attachment (1) with water right
after the use.
While possessing products with strong dyeing
4.
properties (for example, carrot or beet-root)
the bowls or attachments can get colored,
wipe the attachments or bowls with a cloth,
dampened in vegetable oil.
Wash the attachments that will contact prod-
5.
ucts with warm water and a neutral detergent
and dry them thoroughly after use.
Do not immerse the motor unit (2) and the
gears (7, 8) into any liquids, do not wash
them under water jet or in a dishwashing
machine.
Storage
Clean and dry the unit thoroughly before tak-
ing it away for storage.
Do not wind the power cord around the motor
unit.
Keep the blender set away from children in a
dry cool place.
Delivery set
Motor unit – 1 pc.
Blender attachment – 1 pc.
Whisk gear – 1 pc.
Whisk – 1 pc.
Geared lid – 1 pc.
Chopping knife – 1 pc.
Chopper bowl – 1 pc.
Measuring cup – 1 pc.
Measuring cup lid – 1 pc.
Instruction manual – 1 pc.
Technical specifications
Power supply: 220-240 V ~ 50 Hz
Power: 300 W
Maximal power: 700 W
The manufacturer reserves the right to change
the specifications of the unit without a preliminary
notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
6

Werbung

loading

Diese Anleitung auch für:

Vt-3407 bk