Axis T93F-Serie Installationsanleitung Seite 19

Example image: AXIS T93F20 and AXIS P13 Series
1
Bottom cover
2
Screw T20 (4x)
3
Wall bracket
4
Bracket adjustment screw T30
Install the Camera in the Housing
1. Loosen the holder screws, then slide and lift the holder, see illustration below.
2. Attach the holder to the camera. Align the pin and camera screw with the pin hole and
screw mount on the camera and tighten the camera screw (torque 1 Nm). Be careful not
to overtighten the screw.
1
2
3
4
19
AXIS T93F Series