Axis T93F-Serie Installationsanleitung Seite 18

AXIS T93F Series
5. Make sure that the cable gasket is fitted properly.
6. Use the other cable gasket for the power cable (AXIS T93F10). Repeat the steps above.
NO TICE TICE
NO NO TICE
Mount the power connector after the power cable is pushed through the cable gasket.
7. If connecting an auxiliary device, for example an I/O, audio, or external power device, to
the camera, repeat the steps above as applicable to the specific device.
8. Put the bottom cover on the wall mount and tighten the screws (torque 2 Nm).
18