Herunterladen Inhalt Inhalt Diese Seite drucken

Axis T93F-Serie Installationsanleitung Seite 16

Protective/outdoor housing
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 45
AXIS T93F Series
2. Attach the housing to the wall mount. See page 16.
3. Install the camera in the housing. See page 19.
Install the Wall Mount
CAUTION
Make sure that the screws and plugs are appropriate for the material (e.g. wood, metal,
drywall, stone) and that the material is strong enough to support the combined weight
of the camera, housing, and wall mount.
1. Prepare the wall for installation of the wall mount. Use the wall bracket as a template
and mark the holes before drilling the holes.
2. Route the network cable through the wall bracket. Leave approximately 30 cm (11.8 in) of
cable for connecting the camera.
3. Route the power cable (AXIS T93F10) through the wall bracket. Leave approximately
30 cm (11.8 in) of cable for connecting the camera.
4. If connecting an auxiliary device, for example an I/O, audio, or external power device, to
the camera, repeat the step above as applicable to the specific device.
5. Fasten the wall bracket to the wall by tightening the screws.
Note
• For detailed instructions, see the wall mount's Installation Guide supplied in the package
and available on www.axis.com
• For more technical specifications, see the camera's User Manual available on
www.axis.com
Attach the Housing to the Wall Mount
NO TICE
TICE
NO
NO
TICE
• Use cables that keep within the specified cable area, see page 15. Using any other than
the provided cable gasket could cause water to seep in and damage the product. For
information about cable gaskets and cable glands that allow for other cable areas, see
www.axis.com
• If more than one cable is used, each cable must be routed through a separate cable gasket.
• Only open a hole in cable gaskets that will be used and if a cable gasket is torn, replace it
with a new cable gasket. Leaving a cable gasket open or using a torn cable gasket could
cause water to seep in and damage the product.
1. Loosen the bottom cover screws and lift the top cover.
2. Select which cable gasket to use and pull the tab to open a hole for the network cable.
16

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

T93f05T93f10T93f20

Inhaltsverzeichnis