Product Description And Specifications; Intended Use - Stomer Professional SHD-1500-K Bedienungsanleitung

PRODUCT DESCRIPTION AND
SPECIFICATIONS
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
electric shock, fi re and/or serious injury.

INTENDED USE

The machine is intended for chiselling work in concrete,
brick, masonry and asphalt as well as for driving in and
compacting, when using the respective accessories.
TECHNICAL SPECIFICATIONS
PRODUCT ELEMENTS
1 Dust protection cap
2 Locking sleeve
3 Switch locking button
4 On/Off switch
7 Auxiliary handle (insulated gripping surface)
8 Knurled nut for auxiliary handle
9 Handle (insulated gripping surface)
SAFETY NOTES
GENERAL POWER TOOL SAFETY WAR-
NINGS
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mainsoperated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
● Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
● Do not operate power tools in explosive atmos-
pheres, such as in the presence of fl ammable li-
quids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
● Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
Electrical safety
● Power tool plugs must match the outlet. Never mo-
dify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmo-
difi ed plugs and matching outlets will reduce risk of
electric shock.
● Avoid body contact with earthed or grounded sur-
faces, such as pipes, radiators, ranges and refrige-
rators. There is an increased risk of electric shock if
your body is earthed or grounded.
1
2
● Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
● Do not abuse the cord. Never use the cord for car-
rying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges and moving
parts. Damaged or entangled cords increase the risk
of electric shock.
● When operating a power tool outdoors, use an ex-
tension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric
shock.
● If operating a power tool in a damp location is una-
voidable, use a residual current device (RCD) pro-
tected supply. Use of an RCD reduces the risk of
electric shock.
Personal safety
● Stay alert, watch what you are doing and use com-
mon sense when operating a power tool. Do not use
a power tool while you are tired or under the infl u-
ence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in
serious personal injury.
● Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will redu-
ce personal injuries.
● Prevent unintentional starting. Ensure the switch is
in the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your fi nger on the switch
or energising power tools that have the switch on
invites accidents.
● Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in perso-
nal injury.
● Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
● Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
● If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
Power tool use and care
● Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it
was designed.
● Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
● Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures redu-
ce the risk of starting the power tool accidentally.
GB
7