gc D Light Pro Betriebsanleitung Seite 8

► SELECTING THE ENERGY OF TREATMENT
It is always advisable to start from a low energy level and gradually increase to find the right intensity according to your own
tolerance. The energy level is selected by pressing the + - buttons (10 and 11), the selected energy level is on the level
indicator (13).
The following are intensity levels recommended for epilation and photorejuvenation:
Energy from 4 to 7 for lighter skins.
Energy from 3 to 5 for darker skins.
As the enegry level increases, so does the results, as well as the risk of possible side effects, you can push to power 10
gradually and only if you do not feel discomfort.
If blistering occurs on the skin, or if you feel burning, IMMEDIATELY STOP
using the device.
10
► EPILATION TREATMENT
During epilation treatment, it is important to follow a patter that allows you to cover the entire area to be treated, avoiding
double pass or overexposures. Once the area to be treated is determined, point the Flash window (4) in contact with the
skin and press the Flash button (2). When the Flash button is pressed, the LEDs on the Handpiece (3) become green, then
2 consecutive flashes that serve to treat the same area. Once the flashes are emitted, the LEDs on the Handpiece (3) start
flashing sequentially to indicate that the new spot is being loaded. When the LEDs on the Handpiece stop flashing and
become all blue, it means that the flash is loaded and ready to handle the next area.
► HAIR REMOVAL TREATMENT CYCLE
The number of treatments required to maintain a hairless skin, also depends on the individual's hair regrowth rhythm , the
recommended treatment cycle are as follows:
0--3 months- 1 treatment every 2 weeks
3-6 months - 1 treatment once a month
6-9 months - plan your treatments according to your needs
Over 9 months - Only 1 or 2 treatments required per year.
At the end of the epilation treatment, it is highly advisable to apply a softening cream to balance the ph such as a D Light
post treatment cream.
11