Problems And Solutions; Technical Specifications - gc D Light Pro Betriebsanleitung

PROBLEMS AND SOLUTIONS

PROBLEM
The appliance does not start
The contact sensor does not detect the skin
The appliance does not emit pulses
The device buttons are not pressure sensitive
The machine emits 3 consecutive beeps and does not shoot
the flash
18
CONTROL / SOLUTION
Connect to a better power socket
Contact our customer support
Replace the lamp
Contact our customer support
Check if the display does not blink when in contact with
the skin
Replace the lamp
Contact our customer support
Contact our customer support
The problem can occur when you switch to the next treated
area without touching off the skin, but slide it on the same
area. To unlock the machine, point the flash window toward
the vacuum and press the firing button. In this way, the
contact sensor is reset and the machine resumes to operate
normally.

TECHNICAL SPECIFICATIONS

Type of Lamps
Wavelength
Area spot
Energy density
Pulse number
Energy level
Power supply
Rated input power
Net weight
Equipment size
Package size
►
ENVIRONMENTAL SPECIFICATIONS
Operating Ambient Temperature : 10ºC ~ 30ºC
Storage Ambient Temperature -10ºC ~ 55ºC
Degree of Operation Humidity: ≤70%
Degree of Moisture Storage: ≤93%
Maximum operating altitude: 860hPa ~ 1060hPa
Do not expose device directly to the sun or other radiation
If the appliance has been stored in a room with temperature too cold for days
without being used, you will need to bring it back to 15 ° C or more before
you can use.
HR (Epilation) SR (Photorejuvention)
530nm~1100nm / 650nm~1100nm
4.4cm*1.6cm
0 ~ 7J/cm 2
2 (HR) / 5 (SR)
1 ~ 10
AC100V-240V,50Hz/60Hz
150W
1.75kg
L270mm*W230mm*H120mm
L300mm*W300mm*H135mm
19