General Information; Appliance Description - STIEBEL ELTRON WK 2 Installation

INSTALLATION

General information

1. General information
Note
Read these instructions carefully before using the ap-
pliance and retain them for future reference.
Pass on the instructions to a new user if required.
1.1 Relevant documents
Operating and installation instructions for the exter-
nal unit
Note
Please see appliance operating and installation in-
structions for information on the "Guarantee" and
"Environment and recycling".
1.2 Units of measurement
Note
All measurements are given in mm unless stated oth-
erwise.

2. Appliance description

Dimensions
WK 2
800
Construction
1
2
17
14
13
8
15
11
1 End cap
2 Retaining clip M12
3 Rubber buffer
4 Hexagon nut M12
5 System rail 800 mm
6 Retaining clip M8
7 Slide nut M10
8 Washer 8.5 x 20.5 x 2
9 Hexagon bolt M8 x 25
10 Hexagon bolt M12 x 25
11 Washer 12.5 x 36 x 2
12 Hexagon bolt M8 x 75
13 Fixing aid
14 Slide nut M12
15 Angular bracket
16 Hexagon bolt M12 x 90
17 System rail 880 mm
2.1 Standard delivery
- Hexagon nut M12 (6x)
- Hexagon bolt M12 x 25 mm (8x)
- Hexagon bolt M12 x 90 mm (6x)
- Hexagon bolt M8 x 25 mm (2x)
- Hexagon bolt M8 x 75 mm (2x)
- Angular bracket (2x)
- Retaining clip M8 (4x)
- Retaining clip M12 (10x)
- Slide nut M10 (2x)
- Washer 12.5 x 36 x 2 mm (14x)
- Washer 8.5 x 20.5 x 2 mm (4x)
- System rail 800 mm (2x)
- System rail 880 mm (2x)
- Slide nut with fixing aid M12 (8x)
- Rubber buffer (4x)
- End cap (6x)
3
4
6
5
7
8
9
12
11
10
16
| 5