Herunterladen Inhalt Inhalt Diese Seite drucken

Preparing For Use - Crock-Pot CSC024X Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 20
FITTING OF A PLUG - FOR U.K. AND IRELAND ONLY
This appliance must be earthed.
If the plug is not suitable for the socket outlets in your home, it can be removed and replaced by a plug of the correct type.
If the fuse in a moulded plug needs to be changed, the fuse cover must be refitted. The appliance must not be used without
the fuse cover fitted.
If the plug is unsuitable, it should be dismantled and removed from the supply cord and an appropriate plug fitted
as detailed. If you remove the plug it must not be connected to a 13 amp socket and the plug must be disposed of
immediately.
If the terminals in the plug are not marked or if you are unsure about the installation of the plug please contact a qualified
electrician.
Make sure your multi-cooker is switched off and unplugged from the mains supply socket
before cleaning. Never immerse the heating base, cord or plug in water or any other liquid
Before using your multi-cooker for the first time, wash the lid, cooking bowl, 2-way rack and rice measure in warm,
soapy water. Rinse and dry thoroughly. Do not use harsh abrasives, chemicals or oven cleaners.
Before cooking for the first time, wipe the interior of the cooking bowl with a light coat of cooking oil to condition the
cooking surface.
Using a damp cloth or sponge, wipe the exterior and interior of the heating base. Use a mild detergent solution. Dry
thoroughly.
IMPORTANT NOTES: Some countertop and table surfaces are not designed to withstand the prolonged heat generated
by certain appliances. Do not set the heated unit on a surface that may be damaged by heat. We recommend placing an
insulated pad or suitably sized trivet under your multi-cooker to prevent possible damage to the surface.
Lid
A
2-way rack
B
Cooking bowl
C
Heating base
D
Control panel
E
Rice measure
F
Sauté/brown function button
G
Slow cook function button
H
Plug should be ASTA approved to BS1363
Fuse should be ASTA approved to BS1362
Green/Yellow
(Earth)
Blue
(Neutral)
Ensure that the outer sheath of
the cable is firmly held by the cord grip

PREPARING FOR USE

PARTS
I
J
K
L
M
N
O
P
5
13A
Fuse
Brown
(Live)
Roast function button
Bake function button
Steam function button
Increase/decrease temperature buttons
Increase/decrease timer buttons
Display
Standby button
Stop/start button

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis