Aux Function - Clarion DUZ388R MP Bedienungsanleitung

DUZ388RMP_EN.book Page 28 Monday, November 26, 2007 9:56 AM
Operations Common to Each Mode
● Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold cable, you can listen to
your telephone calls on your car speakers.
∗ The factory default setting is "OFF".
2-1. Select "TEL-SW".
3-1. Press the [w] or [z] button to select the
setting. Each time you press the [w] or
[z] button, the setting changes in the
following order:
"OFF" ↔ "ON" ↔ "MUTE"
• OFF:
This unit continues normal operation even
when the cellular phone is used.
• ON:
You can listen to your telephone calls from
the speakers connected to this unit.
∗ When listening to your calls on your car
speakers, you can adjust the volume by
turning the [ROTARY] knob.
• MUTE:
The sound from this unit is muted during
telephone calls.
Note:
• If connecting a hands-free kit, please ensure the
setting is ON to receive the telephone audio
through the system.
● Performing a system check
This function allows you to perform a system
check from the adjust mode when required.
2-1. Select "SYSTEM CHECK".
3-1. Press and hold the [
second or longer.
"SYSTEM CHECK" appears in the display,
then the unit returns to the previous
operation mode.
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for CD and CD changer.
The number of titles that can be entered for
each mode are as follows.
Mode
CD mode
CD changer mode
DCZ628 connected
1. Press the [SRC] button to select the mode
you want to enter a title (CD or CD changer).
2. Select and play a CD in the CD changer for
which you want to enter the title.
28
DUZ388RMP
3. Press and hold the [DISP] button for 1
4. Press the [x] or [v] button to select
5. Press the [
6. Press the [x] or [v] button to move the
7. Press the [BND] button to select a character
8. Press the [w] or [z] button to select the
9. Repeat steps 6 to 8 to enter up to 10
10.Press and hold the [
Clearing titles
1. Select and play a CD in the CD changer for
2. Press and hold the [DISP] button for 1
3. Press the [x] or [v] button to select
4. Press the [
5. Press and hold the [BND] button for 1
] button for 1
6. Press and hold the [

AUX function

This system has an external input jack on the
front panel so you can listen to sounds and
music from external devices connected to this
unit.
● Selecting AUX IN sensitivity
Make the following settings to select the
sensitivity when sounds from external devices
connected to this unit are difficult to hear even
Number of titles
after adjusting the volume.
∗ The factory default setting is "MID".
50 titles
1. Press and hold the [DISP] button for 1
Number of titles
2. Press the [x] or [v] button to select
100 titles
3. Press the [w] or [z] button to select
Note:
• When AUX mode is selected,AUX IN sensitivity
can be set.
second or longer.
"TITLE INPUT".
] button.
The display switches to the title input display.
cursor.
type. Each time you press the [BND] button,
the character type changes in the following
order:
Capital letters ➜ Numbers ➜ Symbols ➜
Umlaut ➜ Capital letters...
desired character.
characters for the title.
] button for 2 seconds
or longer to store the title into memory.
which you want to clear the title.
second or longer.
"TITLE INPUT".
] button.
The display switches to the title input display.
second or longer.
All characters in the title disappear.
] button for 2 seconds
or longer to store the setting.
second or longer.
"AUX SENS".
"HIGH", "MID" or "LOW".