Clarion DUZ388R MP Bedienungsanleitung Seite 27

DUZ388RMP_EN.book Page 27 Monday, November 26, 2007 9:56 AM
Operations Common to Each Mode
● Entering message information
Message up to 30 characters long can be stored
in memory and displayed as a type of screen
saver setting.
∗ The factory default setting is "WELCOME TO
CLARION".
2-1. Select "MESSAGE INPUT".
3-1. Press the [ ] button.
3-2. Press and hold the [BND] button for 1
second or longer to clear the old message.
3-3. Press the [x] or [v] button to move the
cursor.
3-4. Press the [BND] button to select a
character type. Each time you press the
[BND] button, the character type changes
in the following order:
Capital letters ➜ Numbers ➜ Symbols ➜
Umlaut ➜ Capital letters...
3-5. Press the [w] or [z] button to select the
desired character.
3-6. Repeat step 3-3 to 3-5 to enter up to 30
characters for message.
3-7. Press and hold the [
seconds or longer to store the message in
memory.
∗ Press and hold the
[BND
second or longer to cancel the input
message. Then press and hold the
button for 2 seconds or longer to store the
message and the message return to default
setting.
● Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA/AAC
title.
∗ The factory default setting is "ON".
2-1. Select "SCROLL".
3-1. Press the [w] or [z] button to select "ON"
or "OFF".
• ON:
To scroll automatically.
• OFF:
To scroll just 1 time.
∗ When you want to see the title again, in the
title mode, press and hold the [DISP] button
for 3 seconds or longer to scroll the title.
● Setting the dimmer control
You can set the dimmer control "HIGH", "MID",
"LOW" or "OFF".
∗ The factory default setting is
2-1. Select "DIMMER".
3-1. Press the [w] or [z] button to select
● Anti-theft indicator
The red Anti-theft indicator is a function for
prevent theft.When the ACC or POWER is off,
this indicator blinks.
∗ The factory default setting is "OFF".
2-1. Select "BLINKLED".
3-1. Press the [w] or [z] button to select "ON"
● Set the cellular phone connection
mode (AUX/CeNET)
You can listen to your telephone calls from the
speakers connected to this unit.
∗ The factory default setting is "AUX".
2-1. Select "TEL-SEL".
3-1. Press the [w] or [z] button to select
] button for 2
] button for 1
[ ]
● Setting the car speaker output for the
cellular phone
∗ The factory default setting is "RIGHT".
∗ To output the telephone calls, set the cellular
phone interrupt to "ON".
2-1. Select "TEL-SP".
3-1. Press the [w] or [z] button to select
"HIGH
".
"HIGH", "MID", "LOW" or "OFF".
or "OFF".
"AUX" or "CENET".
• AUX:
AUX input jack in front panel is for cellular
phone audio input, when the AUX input
jack is used to connect an AUX
BLUETOOTH BB (BLT373) (sold
separately).
• CENET:
CeNET input cable is for cellular phone
audio input, when a CeNET cable is used
to connect a cellular phone (BLT583) (sold
separately). See "Bluetooth BB
Operations" (page 33-35) for details.
"RIGHT" or "LEFT".
• RIGHT:
Telephone calls can be heard on the front
right speaker connected to this unit.
• LEFT:
Telephone calls can be heard on the front
left speaker connected to this unit.
DUZ388RMP
27