Operations Common To Each Mode - Clarion DUZ388R MP Bedienungsanleitung

DUZ388RMP_EN.book Page 25 Monday, November 26, 2007 9:56 AM

Operations Common to Each Mode

To change adjustment setting
1. Press and hold the [DISP] button for 1
second or longer to switch to the
adjustment selection display.
2. Press the [x] or [v] button to select
the "item name".
"CONTRAST" ↔ "SETTINGS" ↔ "COLOR"
↔ "CODE" ↔ "SCRN SVR" ↔ "MESSAGE
INPUT" ↔ "SCROLL" ↔ "DIMMER" ↔
"BLINKLED" ↔ "TEL-SEL" ↔ "TEL-SP" ↔
"TEL-SW" ↔ "SYSTEM CHECK"
3. Press the [w] or [z] button to select the
"desired setting value".
∗ In the case of display blinking "ENT", you
can press the [ ] button to adjust the
setting value.
∗ After completing settings, press the [DISP]
button to return to the previous mode.
● Setting the contrast
You can adjust the display contrast to match the
angle of installation of the unit.
∗ The factory default setting is "10".
(Adjustment level: 1 to 16)
2-1. Select "CONTRAST".
3-1. Press the [w] or [z] button to adjust the
contrast.
● Displaying the settings
The number of indicator of this unit decreases,
you can see the state of current settings at any
operation mode.
2-1. Select "SETTINGS".
3-1. Press the [w] or [z] button to display the
state of current settings.
∗ When the setting is selected, after 1 second
the current state will be displayed.
For example
or
● Setting the button illumination
2-1. Select "COLOR".
3-1. Press the [w] or [z] button to select the
• Setting COLOR SCAN mode
As selecting "COLOR SCAN", the color
automatically changes.
∗ The factory default setting is
∗ After 3 seconds the color changes to the other.
• Setting USER mode
The factory default setting is "RED 8" (red),
"GREEN 8" (green), "BLUE 8" (blue).
As selecting "USER COLOR 1, 2, 3", press the
[
1. Press the [x] or [v] button to select
"RED", "GREEN" or "BLUE".
2. Press the [w] or [z] button to select from 0
to 8.
3. Press and hold the [
or longer to store the color in memory and
return to the previous mode.
after 1 second
color type in the following orders:
"COLOR SCAN" ↔ "INDIGO BLUE" ↔
"SURF BLUE" ↔ "SILKY WHITE" ↔
"AQUA GREEN" ↔ "FRESH GREEN" ↔
"LEAF GREEN" ↔ "WARM AMBER" ↔
"PASSION RED" ↔ "VIVID PINK" ↔
"PALE PINK" ↔ "DARK VIOLET" ↔
"PURE PURPLE" ↔ "USER COLOR1" ↔
"USER COLOR2" ↔ "USER COLOR3" ↔
"COLOR SCAN" ...
"COLOR SCAN
] button to enter the setting.
] button for 2 seconds
DUZ388RMP
".
25