Roger Beep Tone; Button Beep (Keytone); Call Ringer; Keypad Lock - TTI Freequency PMR-120TX Bedienungsanleitung

To enable the VOX operation:
- From standby mode, press the MODE button 3 times unitil the
blinking VOX icon (
- Press the Up or Down button to select the VOX on or oF as
desired.
- Press the PTT button momentarily confirm selection.
- When enabled, the VOX icon (
(5) Rogrer Beep Tone
The Roger Beep is a tone which is automatically transmittied
whenever the PTT button is released.
To enable and disable the Roger Beep tone:
- From standby mode, press the MODE Button 4 times unitil
the flashing Roger Beep icon (
- Press the Up or Down Button to select the tone on or off as
desired.
- Press the PTT button momentarily to confirm selection.
- When enabled, the Roger beep icon (

(6) Button Beep (keytone)

This feature allows the transceiver to sound a confirmation
tone whenever the following keys are pressed: Power On/Off/
Scan Button, Up/Down Buttonsand MODE Button. This feature
is always on.

(7) Call Ringer

The transceiver provides a transmit call ring melody to alert
other users of an incoming call. From standby mode, pressing
the PTT button twice in quick succession will transmit the call
ringer melody.

(8) Keypad Lock

The lock function is to avoid the accidental changes of radio
settings. The POWER On/Off, PTT and Volume Up/Down
button will supercede the lock function.
To set the keypad lock operation :
- From standby mode, press and hold the MODE button for 2
seconds or until the lock icon ( ) appears on the display.
- To disable the lock operation, press and hold the MODE
button for at least 2 seconds ; the lock icon ( ) will disappear.
) appears with on or oF.
) appears.
) appears with on or oF.
9
PMR120(E) / 9 of 68
) appears.