ION Octave LP Schnellstartanleitung Seite 9

Phono Mode
Before use, please do the following:
•
Ensure the transit screw is properly positioned to unlock the turntable.
•
Remove the stylus protector. Reconnect the protective cap on the stylus when not in use.
•
Ensure the tonearm is free to move from the tonearm rest. Lock the tonearm in place
again when not in use.
1. Press the Source button to select Phono Mode.
2. Lift the cabinet lid and place a record on the platter over the central spindle on the
slipmat.
3. Set the speed selector to 33, 45, or 78 RPM depending on the record.
4. Lift the tonearm from the tonearm rest by using the Raise/Lower Lever and slowly move
it over the record. The turntable platter will start turning.
5. Place the tonearm on the desired location of the record.
6. Gently lower the tonearm onto the record to start playing.
7. When the record is finished playing, the tonearm will automatically lift from the record and
return to the rest. The turntable platter will stop turning.
8. To manually stop the record, lift the tonearm from the record and return it to the rest.
Note: Do not stop or turn the platter manually. Moving or jarring the turntable without
securing the tonearm clamp could result in damage to the tonearm.
Tape Mode
1. Press the Source button to select Tape Mode.
2. Insert the tape with the thicker side of the tape facing to the right of the tape tray. The
cassette will play automatically.
3. Push the Eject/Fast Forward button halfway down to toggle between fast forward and
playback. Release the FF button to start playback.
4. Push the Eject/Fast Forward button completely down to eject the tape.
DAB Mode
1. Press the Source button to select DAB Mode.
2. Octave LP will automatically scan for available stations.
3. When you have selected a station, you can press the Info button to view the following
information in the display: Program Name, Program Type, Program Number, Audio
Setting, Time, and Date.
4. While in DAB Mode, press the Menu button to access the following options:
•
Full Scan: Select this option to perform a full scan for available stations.
•
Manual Tune: Select this option to use the Tuning knob to manually search for a
DAB station.
•
DRC: Select this option to set the Dynamic Range Control to Off, Low, or High.
•
Prune: Select this option to remove stations that are no longer transmitting.
•
System: See System Settings for more information.
9