ION Octave LP Schnellstartanleitung Seite 11

Aux In Playback
1. Set the Source button to Phono Mode.
2. Connect an 1/8" (3.5 mm) stereo audio cable (not included) from the Aux In on the front
panel of Octave LP to the line output or headphone output of your external audio device
to be able to listen to the external source through Octave LP's internal speakers.
3. Adjust the volume on Octave LP to the desired level.
Note: If the line output of your external device is connected, you only need to adjust the
system's volume control. If your external device's headphone output is connected, you may
need to adjust the volume control on both your external device and Octave LP to achieve the
desired volume.
Recording to USB
To record from an audio source to USB:
1. Press the Source button to select CD, Phono, Tape, or Bluetooth Modes.
2. Connect your USB flash drive to the USB Port.
3. Press the Record button to enter recording mode.
4. Press the Previous/Next buttons to select the recording type: Single File (1), Folder (F),
or All (A).
5. Press the Record button again to begin recording. During recording, the USB indicator
will flash in the display.
Note: The recording speed is 1:1.
6. Press Stop to stop the recording.
7. The unit will create a new folder in the USB drive that contains all recorded tracks.
System Settings
1. While in FM or DAB Modes, press the Menu button to open the menu.
2. Use the Tuning/Enter knob to select System, then press it to confirm.
3. Use the Tuning/Enter knob to select from the options below, then press it to confirm.
•
Time: Select this option to adjust the time and date settings.
Set Time/Date: Manually set the time and date. Use the Tuning knob to adjust
o
the values on the display, and press it to confirm.
Auto Update: Select this option to have the time and date automatically
o
update. Select No Update (Off), Update from Any (FM or DAB), Update from
FM, or Update from DAB.
Set 12/24 Hour: Set the time format, either 12 Hour or 24 Hour.
o
Set Date Format: Set the date format, either MM-DD-YYYY or DD-MM-
o
YYYY.
•
Language: Select English, German, French, or Italian.
•
Software Upgrade: Select this option to update the unit's software.
•
SW Version: Displays the current software version.
4. Press the Menu button to move back a page.
11