Internet Browser; Share/Map Network Drive - Kingston MobileLite Wireless G3 MLWG3 Bedienungsanleitung

3. Swipe the 'Network Share' button to the right to enable.
4. Enter a password for access to the storage devices (recommended) and click 'Yes'.
5. Click 'OK' to finish.
3
Access the MLWG3 Using a Computer
The MLWG3 wireless network gives you the option to view the contents on the USB or SD card storage
devices from a computer.

Internet Browser

1. On your computer's Wi-Fi network settings, connect to the MLWG3 (MLWG3-XXXX) network.
2. Open a supported internet browser (Chrome, Firefox, Internet Explorer, or Safari)
3. In the address bar type the MLWG3's IP address, 192.168.202.254
4. You can now view/download your saved content.

Share/Map Network drive

Mac
1. Connect to the MLWG3 (MLWG3-XXXX) network using your computer's Wi-Fi network settings.
2. In the Finder, click Go, and click Connect to Server.
3. Type the MLWG3's IP address, 192.168.202.254 and click connect.
4. Select the volumes you want to mount SD_Card1 and/or USB1 and click OK. The USB/SD
storage devices on your MLWG3 are now available in Finder.
Windows
1. Connect to the MLWG3 (MLWG3-XXXX) network using your computer's Wi-Fi network settings.
2. Open File/Windows Explorer, right click on This PC/Computer and select Map Network Drive.
3. Select your preferred drive letter, type \\192.168.202.254\USB1 or \\192.168.202.254\SD_Card1,
and click Finish. You will have to repeat the steps to map the other volumes, USB1 or SD_Card1.
The USB/SD storage devices on your MLWG3 are now available in File/Windows Explorer.
Document No. iOS-MLWG3-011816.A00
4
MobileLite Wireless G3
5
Page 26 of 28