Access The Mlwg3 Using A Computer; Internet Browser; Share/Map Network Drive; Mac - Kingston MobileLite Wireless G3 Anleitungen

Access the MLWG3 Using a Computer

The MLWG3 wireless network gives you the option to view the contents saved on the USB and SD Card
storage devices connected to your MLWG3 from a computer.

Internet Browser

1. On your computer's Wi-Fi network settings, connect to the MLWG3 network.
2. Open a supported internet browser (Chrome, Firefox, Internet Explorer, or Safari)
3. In the address bar type the MLWG3's IP address, 192.168.202.254
4. You can now view/download your saved content.

Share/Map Network drive

Mac

1. Connect to the MLWG3 network using your Mac's Wi-Fi network settings.
2. In Finder, click Go, and click Connect to Server.
3. Type the MLWG3's IP address, 192.168.202.254 and click connect.
4. Select the volumes you want to mount SD_Card1 and/or USB1 and click OK. The storage
devices are now connected and available in Finder.
Windows
1. Connect to the MLWG3 network using your computer's Wi-Fi network settings.
2. Open File/Windows Explorer, right click on This PC/Computer and select Map Network Drive.
3. Select your preferred drive letter.
4. Type \\192.168.202.254\USB1 or \\192.168.202.254\SD_Card1, and click 'Finish'. The storage
device is now connected and available in File/Windows Explorer.
Note: In Windows, you will have to repeat the steps to map the other volume, USB1 or SD_Card1.
Document No. Android-MLWG3-011816.A00 MobileLite Wireless G3 Page 27 of 29