CleanCraft dryCAT 133 IRSCM Betriebsanleitung Seite 22

GB
DESCRIPTION AND ASSEMBLY
A - Motor head
B - General switch
B1 - Automatic/manual switch
C - Electromagnetic filter shaker device
D - Polyester filter
D1 - Conical cartridge filter
D2 - Cylindrical cartridge filter
E - Electro-tool socket
F - Compressed air socket for pneumatic
accessory
F1 - Compressed air socket (inlet)
G - Tank
H - Hooks
I - Suction inlet
L - Flexible hose
M - Wand
N - Extension
O - Combined brush
P - Aspirmatic double use brush
Q - Dust tool
Q1 - Carpet tool (optional)
R - Small brush
S - Flat lance
T - Round brush
U - Adaptor
V - Motor speed regulator (optional)
1
6
11
11
22
2
7
12
DUST SUCTION / OPERATING INSTRUCTION
- Insert the cartridge filter in the tank (Fig. 1)
- Assembly the head on tank and lock it by hooks
(Fig. 2)
- Connect the flexible hose into the inlet
(Fig. 3)
- Connect the wand and the extensions to other
side of flexible hose (Fig. 4-5-6)
- Select the most suitable accessory
- Connect the vacuum cleaner plug to a suitable
electricity socket
- Switch on the apparatus only after having
carefully read this manual that describes the
parts and functions in full (Fig. 7)
- Example of use of flat lance (Fig. 8)
- Example of use of small tool (Fig. 9)
- Example of use of round brush (Fig. 10)
- Example of use of brush on the floor
(Fig. 11-13)
- Example of use of brush on the carpet
(Fig. 12-14)
ATTENTION
In order to keep in good efficiency the
machine it is useful to clean the cartridge
filter after each utilization.
3
8 9
13
5
4
10
14