Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 58
7
8
1. ON/OFF BUTTON
Press to switch the dehumidifi er on and off . The indicator light to the left of the ON/OFF button remains lit when the appliance
is functioning and unlit when the appliance is off .
2. HUMIDITY SETTING BUTTONS
The desired relative humidity level can be set to between 35% (minimum) and 80% (maximum), with 5% increments each
time the '+' and '-' control buttons are pressed. When the set humidity level is reached, the compressor stops and the fan
continues to turn for 3 minutes. The humidity setting buttons are disabled in the continuous mode.
3. TIMER button
Press to set the start delay when the appliance is off , or the switch-off delay when it is on. The indicator light to the left of the
timer button will light up.
Press or hold the '+' and '-' control buttons to set the desired delay: 30 min (0.5 hours) increments occur between 0 and 10
hours, and 1-hour increments between 10 and 24 hours.
Restore the delay to 0.0 or switch off the appliance to cancel the timer function.
4. TURBO button
Press to select the desired ventilation speed between normal and laundry room function (the indicator light turns on).
5. CONT. button
Enables CONTINUOUS mode. The appliance runs at the maximum dehumidifi cation level until the tank fi lls up. In this mode,
the "+" and "-" control buttons are not enabled (indicator on). If the function is not selected, the unit runs in STANDARD MODE
until the desired humidity level is obtained.
6. FILTER button
Resets the dehumidifi er when the FILTER CLEANING function is activated.
7. ANTI MILDEW button
Activates the ANTI-MOULD function (indicator on). To deactivate the function, press the button again.
8. PUMP button
Runs the DRAIN PUMP (indicator on). This drains the condensation using the pump in the machine itself (DEOS 50 only).
9. DISPLAY
In the standard mode, the display visualises the desired level of humidity while it is being set with the buttons. Once set, the
display will visualise the percentage of relative humidity in the room. In continuous mode, the display will visualise the per-
centage of relative humidity in the room.
AUTO-RESTART
This function enables the dehumidifi er to restart, after a blackout, from the last stored settings.
CAUTION
Do not touch the selector with wet hands (risk of personal injury due to electrocution).
Do not start or stop the appliance by simply plugging it into the power socket or unplugging it (risk of personal injury due to
electrocution).
Avoid prolonged direct exposure to the air fl ow (risk of personal injury due to sensitisation of the skin).

CONTROL PANEL

6
5
4
3
9
GB
2
1
17

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Deos 50

Inhaltsverzeichnis