Herunterladen Inhalt Inhalt Diese Seite drucken

Appendix; Pt-030 Frequently Asked Questions - Olympus PT-030 Bedienungsanleitung

Unterwassergehäuse
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 129

8. Appendix

PT-030 Frequently Asked Questions

Q1 : Which digital cameras can be used with the PT-030?
A1 : The PT-030 is designed specifically for use with the model SP-310 or
SP-350.
Q2 : What precautions must be observed when loading the digital camera into
the Case?
A2 : Pay special attention to the following items when loading the camera into
the Case.
(1) Check that the remaining capacity of the battery in the digital camera is
sufficient.
(2) Check how many more pictures can be saved in image storage.
Please use a storage medium with a sufficient space in order to reduce
the number of times the Case has to be opened and closed.
(3) Remove the strap from the digital camera.
When the camera is loaded without removing the strap, the strap may
get caught when the Case is sealed and this will cause water leakage.
(4) Before sealing the Case, confirm that the O-ring has been installed
properly.
(5) Confirm that the TTL connector cap is closed tightly.
(6) Confirm that the O-ring and the O-ring contact surface are free of dirt,
hair and other foreign matter.
(7) Insert the silica gel for defogging. Please use silica gel for the Olympus
Case.
(8) Be sure to pull up the mode dial knob of the Case before loading the
camera in it. After inserting the camera, pushdown the mode dial knob to
fit it on the camera's mode dial.
(9) Be sure to attach the special balance weight to the tripod seat after
completing installation.
Q3 : What cautions must be observed when using and storing the Case?
A3 : Pay special attention to the following items.
(1) When the O-ring contact surface is pressed strongly from the outside of
the Case, or when the Case is twisted, the waterproof function may be
impaired and water leakage may be caused.
(2) When the Case is used, left or stored at the following locations, defective
operation or trouble may be caused. Always avoid such locations.
(a) Places where the Case can reach high temperatures under direct
sunlight or in a car, places with extremely low temperatures, and
places with extreme temperature variations
E-37

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis