Technical Characteristics - Mestra R-080422 Gebrauchsanleitungen

IMPORTANT- The Ultrasonic Bath transducers' supply voltage can be hundreds of volts,
and so it is important the Safety Regulations be observed:
1) Do not open the lid when the cable is connected to the mains.
2) Avoid splashing water or other conducting liquids onto the unit's housing.
3) Always connect the unit to earthed power outlets.
PRECAUTIONS
♦ Connect the unit to a 230 V, 50/60 Hz earthed power outlet.
♦ Do not use inflammable solvents as cleaning solutions.
♦ Do not start up the unit with less than 10 cm of liquid at the bottom of the tank.
♦ Do not allow children or unskilled people to handle the unit.
♦ Do not overload the tank.
♦ Never submerge the unit in any liquid to clean it.
♦ Do not start up the unit when the tank is empty.
♦ Ultrasonic cleaning is not suitable for orga nic pearls.
♦ Do not open the unit while it is connected to the mains.
♦ The machine lid may be hot after a cycle. Remove it carefully.
♦ If you are not sure of the exact effects of the cleaning solution on a given item to be cleaned, first
carry out a test with a single item.

TECHNICAL CHARACTERISTICS

Tank capacity:
Tank dimensions:
Outer dimensions:
Supply voltage:
Construction
material:
Transducer power
Total power level
Frequency
4.5 L
300 x 150 x 100 mm
425 x 270 x 220 mm
230 V, 50/60 Hz
Stainless steel
100 W
240 W
40 Khz
English
9