Interface And Output; Error Codes; Maintenance And Cleaning - IKA WiCo LR 1000 control Betriebsanleitung

Interface and output

Please refer to the operating instructions of LR 1000 control and
RET control-visc.

Error codes

Please refer to the operating instructions of LR 1000 control and
RET control-visc.

Maintenance and cleaning

The device should operate without the need for maintenance,
however it is subject to natural wear and tear on parts and their
statistical failure rate.
Cleaning
Remove the device from the
mains before cleaning.
Only clean IKA appliances using these IKA
®
agents.
Dirt Cleaning agent
Dyes Isopropyl alcohol
Building materials Water containing detergent/isopropyl alcohol
Cosmetics Water containing detergent/isopropyl alcohol
Food Water containing detergent
Fuels Water containing detergent
Other materials Please consult IKA
- Wear protective gloves during cleaning the instrument.
- Electrical devices may not be placed in the cleaning agent for the
purpose of cleaning.
- Do not allow moisture to get into the equipment when cleaning.
- Please consult IKA before using any cleaning or decontamina-
®
tion methods, other than those recommended here.
Ordering spare parts
When ordering spare parts, please make sure to indicate the fol-
lowing:
- device type
- device serial number; see rating plate
- software version
- position number and description of spare part;
see www.ika.com.
approved cleaning
®
®
16