Filter And Glue Sheet Installation - Sharp UA-PM50E Bedienungsanleitung

FILTER AND GLUE SHEET INSTALLATION

To maintain the quality of the fi lter and Glue Sheet, it is installed in the main unit and packed in plas-
tic bag. Be sure to remove the fi lter and Glue Sheet from the plastic bag before using the unit.
1
Remove the Catch Panel from
underpart.
2
Hold the tabs of Pre-fi lter, lift it
and remove it from its under-
part.
3
Remove the plastic bags and
take out the Filter.
4
Place the Filter inside the main
unit.
HEPA Filter
5
Hold the tabs of Pre-Filter, and
replace it from upper part.
E-6
Deodorizing Filter