Manta MM360 Bedienungsanleitung Seite 9

User's Manual
PL
The G SENSOR
During hard braking or sudden event activated recorder accelerometer to
protect the recorded file should be overwritten. The sensitivity of the
accelerometer can be set in the corresponding menu.
Motion detection
In standby mode, press DOWN After detecting moving objects, the
recorder starts recording video. After 5 seconds of no movement of
objects will enter the motion detection. After detecting objects starts
recording again.
Options and system settings
In standby mode, press the MENU button to change the settings of the
recorder. Navigating the menu buttons UP / DOWN selection options REC
button. After setting the selected parameters, press the MENU button to
exit the setup menu.
9