View/Change Duty Time Alarm; Standby (Energy Saving) Mode - Prince Castle 247-Series Bedienungshandbuch

Toaster Grills
Models 247 & 248
A. Press and hold the LOGO button. Immediately press
1
the TIME button.
B. Release all buttons. The display will show the present
duty time for "BUN1" in Dedicated Mode and for
whichever product is selected in Product Mode.
To change the duty time of the currently selected product,
2
press and hold the buttons in Step 1 for 6 seconds.
The LEDs above the TIME and UP Arrow button will
flash yellow, indicating that the unit is now in the duty
time programming mode.
Direct Method: To place the unit in Standby Mode,
1
close the platen and press and hold the UP and
DOWN buttons together for 3 seconds. The unit will
stop timing and the display will indicate "STBY". Open
the platen to cancel Standby mode. (See Figure 12.)
After Toasting: After toasting is complete, the Done
2
Alarm will sound for 7 seconds. If the platen is left
closed, the Toaster Grill will automatically enter the
Standby Mode and the display will read "STBY". Open
the Toaster Grill to reactivate it from Standby Mode.
(See Figure 13.)
Printed in USA 01/05 © 2005

View/Change Duty Time Alarm

Standby (Energy Saving) Mode

Figure 12
Figure 13
8
Press and release the UP or DOWN buttons to change
3
the currently selected product's duty time.
When finished, press and release the TIME button to save
the new value and return to toasting.
To exit the programming mode without saving any
changes, press and release the LOGO button.
Note: The duty time may be set to OFF or 15 – 20
seconds. If not off, the duty alarm will sound the
programmed number of seconds after toasting is started.
UP and DOWN Arrows
247-500E