View/Change Set Temperature - Prince Castle 247-Series Bedienungshandbuch

To reset all settings to factory presets, at power-on immediately
(within 3 seconds) press and hold the LOGO, UP and DOWN
buttons simultaneously until the display shows 'PSET'. Release
all buttons. After about 10 seconds, the unit will operate with
factory preset temperature, time and display name values. (See
Figure 5.)
All previously saved settings are lost upon resetting the defaults.
In Product Mode:
Press and hold the currently selected product's button and
immediately press the TEMPERATURE button. Release both
buttons.
The display will show the pre-set toasting temperature for the
selected product. (See Figure 6.)
In Dedicated Mode:
Press and release the TEMPERATURE button. The display
will show the pre-set toasting temperature for "BUN1".
(See Figure 7.)
247-500E
Resetting to Factory Presets
Figure 5

View/Change Set Temperature

To View the Current Set Temperature
Figure 6
Figure 7
5
Press These Buttons
at the Same Time
Product Mode
Press PRODUCT Button and
TEMPERATURE Button
Dedicated Mode
Press TEMPERATURE
Button
Toaster Grills
Models 247 & 248
Product's Set
Temperature Is
Displayed
Display Shows BUN1
Set Temperature
Printed in USA 01/05 © 2005