Installation; Setting The Controls - Prince Castle 247-Series Bedienungshandbuch

Remove the unit from the carton and inspect for signs of
damage. If there is damage to the unit:
• Notify the carrier within 24 hours of delivery.
• Save carton and packaging materials for inspection purposes.
• Contact your local dealer, or if purchased directly, the Prince
Castle Sales Department at 1-800-722-7853 or 630-462-8800
to arrange for a replacement unit.
Before first use, clean and condition the platens (see
Conditioning Platens).
The model 247 & 248 Toaster Grills provide two modes of
operation: DEDICATED MODE and PRODUCT MODE.
• DEDICATED MODE is a simple mode of operation for toasting
buns that is similar to the 213, 411 & 416 Series Toaster Grills,
with a set toast time and temperature for one product "BUN1".
• PRODUCT MODE allows you to set both the toasting time and
temperature individually for four additional products. Note that
it may take several minutes for the platen to heat up or cool
down to a new temperature setting. You can also change the
display to any four character name of your choice for each of
the products to indicate which product is being toasted.
• Furthermore, 247 and 248 Toaster Grills allow you to manually
initiate the power-saving mode. (See Figure 1.)
When the Toaster Grill is in Dedicated Mode:
1
Press and release both the UP and DOWN arrows
at the same time. This will change the Toaster Grill
to Product Mode. Products 1 through 4 will be
available.
When the Toaster Grill is in Product Mode:
2
Press and release both the UP and DOWN arrows
at the same time. This will change the Toaster Grill
to Dedicated Mode. BUN1 will be the only product
available.
247-500E

Installation

NOTE: When using this unit, the ambient temperature at the
mounting site should not exceed 43°C (110°F).
All electrical connections must be in accordance with local
electrical codes and any other applicable codes.
Plug the unit into an applicable electrical receptacle.

Setting the Controls

UP Arrow
Figure 1
NOTE: While the unit is adjusting to the new set temperature,
the product name flashes in the display. In the Dedicated
Mode this is "BUN1". In the Product Mode, the name will be
the currently selected product.
When the unit reaches set temperature, the product's name
is displayed steadily in Product Mode, or the display shows
"RDY" in Dedicated Mode.
The adjustment time necessary will depend on the set
temperature.
3
Models 247 & 248
CAUTION
DOWN Arrow
TEMPERATURE Button
Printed in USA 01/05 © 2005
Toaster Grills
TIME
Button