Conditioning The Platens - Prince Castle 247-Series Bedienungshandbuch

To minimize bun-sticking, the platens should be wiped
1
weekly with McD Bun Toaster Grill Release Agent.
Use only McD Bun Toaster Grill Release Agent on bun
Toaster Grills. Other products may cause damage and
void the Warranty.
A. Dust all loose crumbs from Toaster Grill surfaces.
B. Apply McD Bun Toaster Grill Release Agent to cool or
warm Toaster Grill platens.
To coat the platen surface, thoroughly wet a clean, folded
2
customer napkin or paper towel with Toaster Grill Release
Agent, and place it on No. 257 cleaning tool.
247-500E

Conditioning the Platens

CAUTION
A. Rub a generous amount of the Release Agent over the
3
entire surface of the platen until well coated.
B. Repeat Steps 2 & 3 for other platens, including
undersides.
BURN HAZARD! Use protective gloves and No. 257
cleaning tool when conditioning hot platens.
IMPORTANT! Do NOT wipe Toaster Grill with a damp cloth
after Release Agent is applied. Doing so removes Agent and
causes sticking.
Toaster Grill platens must be clean and dry.
Reapply Release Agent weekly to all platen surfaces
4
while Toaster Grill is cold.
If sticking occurs between weekly applications, reapply
Release Agent more frequently as described in Steps
1 – 3.
13
Toaster Grills
Models 247 & 248
WARNING
Printed in USA 01/05 © 2005