View/Change Set Toasting Time - Prince Castle 247-Series Bedienungshandbuch

Toaster Grills
Models 247 & 248
To Change the Set Temperature
Press the button(s) used to view the set temperature.
1
Hold the button(s) for 6 seconds.
The LED above the TEMPERATURE button will
flash yellow, indicating that the unit is now in set-
temperature programming mode. Release all
buttons.
Press and release the UP or DOWN buttons to change
2
the currently selected product's toasting temperature.
Holding either button for 3 seconds will allow
automatic "fast scrolling" for easier programming.
The temperature can be set from 37°C to 287°C
(100°F to 550°F).
When finished, press and release the TIME button to
3
save the new value and return to toasting.
Press and release the LOGO button at any time to
exit the programming mode without saving any
changes made.
In Product Mode:
Press and Hold the currently selected product's button and
immediately press the TIME button. Release both buttons. The
display will show the present toasting time for the selected
product. (See Figure 9.)
Printed in USA 01/05 © 2005

View/Change Set Toasting Time

To View the Set Toasting Time
6
NOTE: While the unit is adjusting to the new set temperature,
the product name flashes in the display. In the Dedicated
Mode this is "BUN1". In the Product Mode, the name will be
the currently selected product.
When the unit reaches set temperature, the product's name
is displayed steadily in Product Mode, or the display shows
"RDY" in Dedicated Mode.
The adjustment time necessary will depend on the set
temperature.
LOGO Button
Figure 8
Product Mode
Press PRODUCT Button
and TIME Button
Figure 9
Product's Set Time
Is Displayed
247-500E