Height Adjustment - Stryker 240-099-110 Betriebs- Und Wartungsanleitung

Making Roll Stand Adjustments
CAUTION: DO NOT MOVE ROLL STAND WHILE DISPLAY IS IN HIGHEST VERTICAL POSITION. LOWER
DISPLAY BEFORE MOVING ROLL STAND.

Height Adjustment

CAUTION: The Roll Stand Post operates by pneumatic pressure. The Post will travel upward when the Foot Pedal is
pressed. Ensure that nothing will obstruct upward travel before pressing the Foot Pedal.
1. Press and hold the Foot Pedal to release the Post for positioning.
2. Move the mounted instrument to the desired height and release the Foot
Pedal to lock the Post in position.
Locking the Casters
There are two (2) locking casters on the Roll Stand. Locking casters
are identified by labels on the top surface of two (2) legs of the Roll
Stand Base.
Press lever downward to lock a caster. Lift lever to unlock.
Swiveling the Flat Panel
Loosen the Swivel Adjustment Lever. Swivel flat panel to desired position.
Tighten Swivel Adjustment Lever to lock flat panel in position.
10
Swivel Adjustment Lever
Unlock
Lock