A - Safety Instructions; Operating Precautions; Maintenance And Cleaning; Recycling - THOMSON SMART 761 Bedienungsanleitung

Colour video interCom 18Cm

1 - OPERATING PRECAUTIONS

• Do not install the monitor in locations with
high humidity and/or extreme temperatures, or
where there is a risk that the equipment might
rust or be exposed to dust.
• Do not install the monitor in cold locations
or locations subject to large temperature
fluctuations.
• The intercom panel must not be exposed to
direct sunlight, rain or high humidity. Preferred
locations are porches or covered areas.
• The intercom panel must not be installed where
the lens filter may be vulnerable to scratching
or dirt.
• Do not daisy-chain extension cords and/or
multi-socket adapters.
• Do not install near acidic chemicals, ammonia
or sources of toxic gases.
• Do not install in explosive environments or near
volatile or inflammable products.
• Never put objects containing water on top of
the device.
• Never cover the device.
• The monitor, the intelligent bracket and the
mains adapter must only be used indoors.
• Do not extend the cable that connects the
intelligent bracket and the intercom panel: the
quality of communication will drop if anything
other than one single cable is used.
• To prevent interference on the screen, place
the cable connecting the intelligent bracket
and the intercom panel away from all sources
of electro-magnetic radiation (at least 1m).
Examples of sources that should be kept away
from the cable include 230V electric networks,
microwaves and WiFi boxes or routers.
• If the installation bracket for the intercom
panel is not flat (rendering, visible stone), use a
specialised silicone seal to ensure that the rear
of the intercom panel is waterproof.
• If you have trouble starting up or using the
product, lay it flat on a table and test it using an
appropriate cable in order to rule out problems
caused by the installation or positioning.

A - SAFETy iNSTruCTiONS

2 - MAINTENANCE AND CLEANING

• Always unplug the product from the mains
before carrying out any maintenance.
• Never use abrasive or corrosive substances to
clean the products.
• Use a soft, slightly damp cloth.
• Never use an aerosol to spray the product as
this may damage the internal workings.

3 - RECYCLING

This logo indicates that devices which are
no longer in use must not be disposed of
as household waste. They are likely to
contain hazardous substances which are
dangerous to both health and the
environment. Return the equipment to your local
distributor or use the recycling collection service
provided by your local council.
Pour en savoir plus :
www.quefairedemesdechets.fr
EN EN
3