Setting The Operation Mode - Sony SVT-72P Bedienungsanleitung

Setting the Operation Mode

You can set the mode for the VCR when a video
cassette is inserted on the GENERAL SET menu.
1
1
Turn on the power of the equipment to be used.
2
Press MENU and MENU V until "4" of the MAIN
MENU flashes on the monitor screen.
< >
MAIN MENU
1. LANGUAGE
CLOCK SET
SUMMER TIME SET
2. DISPLAY SET
BUZZER
SW OUT
3. ALARM SET
4. GENERAL SET
5. TIMER SET
6. HOLIDAY SET
7. POWER FAILURE/DEW
USED HOUR
8. ALARM DATA
SELECT : NEXT : RETURN : MENU
3
Press MENU B.
The GENERAL SET menu appears.
GENERAL SET
TAPE IN MODE STOP
TAPE END MODE REW
TAPE USED COUNT OFF
CLOCK ADJUST 0 1 : 0 0
APC ON
THREAD CHECK OFF
T/D SEARCH CONVENTION
BAUD RATE 1 9 2 0 0
< >
NEXT PUSH
+
–
SELECT : DATA SET : / RETURN : MENU
18
2-4 5
4
Press MENU V to move the flashing to the setting
of TAPE IN MODE and set STOP or REC by
pressing MENU + or –.
GENERAL SET
TAPE IN MODE STOP
TAPE END MODE REW
TAPE USED COUNT OFF
CLOCK ADJUST 0 1 : 0 0
APC ON
THREAD CHECK OFF
T/D SEARCH CONVENTION
BAUD RATE 1 9 2 0 0
< >
NEXT PUSH
+
–
SELECT : DATA SET : / RETURN : MENU
STOP: the VCR enters stop mode when a video
cassette is inserted.
REC: the VCR enters recording mode when a
video cassette is inserted.
5
Press SEARCH to return to the normal display.
To return to the MAIN MENU screen from the
current menu
Press MENU again.
To go to the next menu from the current menu
Press MENU V until "NEXT PUSH B" flashes and
press MENU B.