Return Delivery; General Description - Honeywell Home CBU142 Einbauanleitung

3.2 Transportation
DANGER!
Overturning of the compact booster unit
Danger of being crushed by compact booster unit!
Never get the system tangled in electrical lines.

 Follow the local safety regulations.
 Consider weight, balance point and suspension point
Use only appropriate and authorised means of

transportation, as crane, fork lift or hand lift.
 By using a crane, attach and transport the safety
separation station as illustrated otherwise move the
pallet with a forklift or pallet truck.
Fig. 1 Attaching the lifting means and transportation
Selecting the adequate transportation device for the weight
class.
1. Remove packaging and caps in the connection
openings
2. Check the damage in transit.
3. Transport the compact booster unit to the assembly
site
4. Lift the compact booster unit with a suitable lifiting
device from the pallet
5. Sling the compact booster unit as shown.
6. Lift the compact booster unit with a suitable lifiting
device from the pallet and dispose the pallet
7. Put the compact booster unit carefully down at the
installation site.
3.3 Storage/Preservation
CAUTION!
Damage during storage caused by frost, humidity,
dirt, UV radiation or pests
Corrosion/Contamination of the compact booster
unit!
Protect the compact booster unit against frost, do
not store outside.
GB
CAUTION!
Damp, dirty or damaged openings and junctions
Leakage or damage of the compact booster unit!
 Uncover openings in the compact booster unit only
during installation.

3.4 Return delivery

1. Remove the power plug from the plug socket
2. Rinse and clean the compact booster unit, especially
for harmful, explosive, hot or other high-risk fluids.
3. If pumped liquids have been transported whose
residues with the humidity lead to corrosion damage
or ignite in the event of oxygen contact, the compact
booster unit must be additionally neutralized and
blown through with anhydrous gas to dry.
4. The compact booster unit must always be
accompanied by a fully completed declaration of non-
objection. It is imperative that you indicate any applied
safety measures and decontamination measures.
3.5 Disposal
WARNING!
Hazardous or hot pump medium
Hazardous for humans and environment!
 Collect and dispose drilling fluid
 Wear protective clothing and mask if necessary.
Observe the legislature concerning disposal of

hazardous media.
1. Remove compact booster unit.
Collect grease and lubricants during disassembly
2. Separate the pump materials for example according
to:
– Metal
– Synthetic material
– Electronic junk
– Grease and lubricants
3. Dispose according to local regualtions or have them
disposed of according to regulations.
Electrical appliances or electronic equipment marked with the
adjacent symbol may not be disposed of with household
waste at the end of its service life.
To return, contact the local disposal partner.
If the old electrical appliance or electronic device contains
personal data, the user himself is responsible for their
deletion before the devices are returned.
4 Description

4.1 General description

Fully automatic, ready-for-connection compact booster unit
consisting of a single pump unit and a buffer tank provides
hygienic separation of drinking water and protects against
non-drinking water of liquid category 5 according to EN 1717.
4 MU0H-1382 GE23R0819